Castaldo Liquafast ICE 1kg Kit


New LiquaFast™ ICE from CASTALDO® is a transparent two–part 0% shrinkage RTV silicone molding rubber that cures very rapidly at normal room temperatures and cures even faster at slightly warmer temperatures.

That means that you can make a mold from your CAD CAM, RP and SLA models in the morning, shoot waxes 30 minutes later and cast them that afternoon. No more waiting.

New LiquaFast ICE makes strong, tough, tear-resistant permanent molds that last and last and do not become soft with age.

LiquaFast ICE works well with all RP types, including hard-to-mold Solidscape® designs. LiquaFast Ice’s low viscosity makes it easy to measure, mix and pour.

Normal cure time is only 60 – 90 minutes. Faster cure is possible at only 50˚ C. / 120˚ F.

LiquaFast ICE is economical, costing far less than traditional silicone RTV materials.

LiquaFast ICE Silicone Jewelry Molding Rubber Physical Properties

Appearance: Transparent, blue
Shrinkage: 0.0%
Working time at 23° C / 73° F: 15 minutes
Setting Time at 23° C / 73° F: 60 – 90 minutes
Setting Time at 50° C / 120° F: 30 minutes
Hardness: 40 – 43 Shore A
Cure system: Platinum
Mixing Ratio: 1 : 1 by weight
Viscosity: 8,500 Cps
Tensile Strength: 3.5 +/- 0.5 N/mm2 508 +/- 73 psi
Tear Strength: 9 +/- 2.0 Nmm 108 +/- 11 ppi
Density: Specific Gravity 1.12
Shelf Life: 18 months
$101.20

More info.

Make 4 payments of $25.30 over 8 weeks and get it now!





Calculate Shipping

SKU CA-60015
Shipping Weight 1.2000kg
Unit Of Measure ea

Be The First To Review This Product!

Help other Combined Jewellery Services Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Categories

Brass Sprue Former

Brass Sprue Former

This brass sprue former is ideal for preparing your rubber mould. The brass rod is adjustable allowing you to set the preferred length of your spru combined with the perfectly shaped end nodule creating an optimal entry point for the wax, which suits a wide range of wax injector nozzles.
Scalpel Blade Handle Plastic

Scalpel Blade Handle Plastic

This plastic scalpel handle features a thicker contoured body allowing for better grip of the handle and is suitable to be used with blade No 10, No 11 and No12.
Scalpel Blade Handle Steel

Scalpel Blade Handle Steel

This steel scalpel handle features a grooved grip section close to the blade for better control whilst using and is suitable to be used with blade No 10, No 11 and No12.
Castaldo Pre-Cut Gold Rubber

Castaldo Pre-Cut Gold Rubber

Castaldo Ready Cut Jewelry Molding Rubber offers the ultimate in mold-making convenience. Made to fit most popular-sized mold frames without cutting, measuring or trimming. Each piece 1 7/8th" x 2 7/8th" x approximately 1/8th" / 4.76 cm x 7.3 cm x approximately 3 mm.. Packed in 5 lb. /