Fretz Lge Embossing Hammer
Sold Out - Backorder Available
HMR-4
The Large Embossing Hammer is used to dome metal from the inside. The metal is stretched from the inside as it is supported on a sandbag or a depression carved in wood. Doming a piece of metal before raising makes it easier to control because the shape becomes rigid. The Embossing Hammer also leaves a very interesting dimpled texture on flat and slightly domed metal when hammering on the outside of a form against a stake.
|
Face sizes |
15mm x 12mm |
|
Head length |
74mm |
|
Handle length |
220mm |
|
Type |
Medium |
WAS $116.60
RRP $116.60
NOW $75.79
SAVE 35%!
Sale Ends in
00:00 am, 31 May 2025
More info| SKU | HT-90004 |
| Shipping Weight | 0.1610kg |
| Shipping Width | 0.008m |
| Shipping Height | 0.002m |
| Shipping Length | 0.024m |
| Unit Of Measure | ea |
Be The First To Review This Product!
Help other Combined Jewellery Services Pty Ltd users shop smarter by writing reviews for products you have purchased.
More From This Categories
Fretz Planish/Insert Hammer
HMR-6
This Planishing Hammer has a single plastic end which can be removed with a Hex Key. The flat plastic end forms metal while leaving it smooth. The metal end is slightly domed to make it easier to strike flat and slightly domed metal. Designed primarily for the bench jeweler who si
Fretz Small Embossing Hammer
HMR-5
The Small Embossing Hammer is used to form small raised areas by hammering from the inside in preparation for chasing or general shaping. This hammer leaves a very fine dimpled texture that can be greatly varied by the strength of the blow.
Fretz Planishing Hammer
HMR-1
The Planishing Hammer is for smoothing metal. The round side is used if the metal has previous raising hammer marks and these need to be smoothed out. The flat side will refine the hammer marks from the rounded side of the Planishing Hammer to a nearly smooth finish. This is the m
