Mini Wings Starter Kit
In Stock
The ever popular Mini Wings are now available in Starter Kits. Consisting of one of each of the following grits 80, 100, 150, 180, 220, 320, 400, 600, 800 & 1000 Grit.
This Abrasive cloth being longer than the abrasive fiber will give to the wheel the capacity to get into different size of rings with the
same efficiency.
The cut of the abrasive cloth at 45 degree, was specially made to facilitate the Penetration of the wheel inside the ring without any difficulty.
Mini Wings are to be used as is. DO NOT USE WITH WATER OR POLISHING COMPOUND.
$35.20
More info| SKU | PO-10120 |
| Shipping Weight | 0.0380kg |
| Shipping Width | 0.100m |
| Shipping Height | 0.030m |
| Shipping Length | 0.160m |
| Shipping Cubic | 0.000480000m3 |
| Unit Of Measure | Kit |
Be The First To Review This Product!
Help other Combined Jewellery Services Pty Ltd users shop smarter by writing reviews for products you have purchased.
More From This Categories
Brass Mounted Brush Kit
These seven quality brushes provide just the right finish for your pieces.
• Mounted brushes have 3/32" shanks
• Brass produces a brushed finish on yellow metals
• Straight wire creates a bright, brushed finish
• Crimped wire creates a matte finish
EVE Pumice Polishing Kit
The pumice polishers in this kit are safe to use around most gemstones, making the polishers ideal for use on settings and other metal work already set with stones. The medium abrasive buffs out nicks and imperfections and the fine abrasive adds that final shine to metal surfaces. For best result
EVE Silicone Inside Ring Polis
This EVE polishing kit is ideal for finishing the inside surfaces of rings and the interior surfaces of curved findings and components. Three abrasive levels help these silicone polishers perform a range of finishing and polishing steps. The kit includes an inside-ring polishing mandrel that allo
EVE Silicone Mounted Polishing
Use these silicone polishers with your flex shaft to work more efficiently and save time at your bench. These polishers are recommended for precious metals at a speed of 8,000rpm with very light pressure, for best results.
Attributes
