Fretz Narrow Collet Hammer

HMR-6 This Planishing Hammer has a single plastic end which can be removed with a Hex Key. The flat plastic end forms metal while leaving it smooth. The metal end is slightly domed to make it easier to strike flat and slightly domed metal. Designed primarily for the bench jeweler who si

HMR-1 The Planishing Hammer is for smoothing metal. The round side is used if the metal has previous raising hammer marks and these need to be smoothed out. The flat side will refine the hammer marks from the rounded side of the Planishing Hammer to a nearly smooth finish. This is the m

HMR-2 The Wide Raising Hammer can be used to raise sheet metal into a bowl against a wooden stake or a metal T-stake. It is also useful for raising in cylinders to form a concave shape. This same hammer also makes it possible to planish subtle concave shapes.

HMR-3 The Narrow Raising Hammer is for raising small cylinders and concave shapes. The thinner heads allow the hammer to fit into tighter curves for raising and planishing. It is also useful forging.