Fretz Narrow Raising/Embos Ham
In Stock
HMR-108
The Rounded Narrow Raising Hammer can emboss narrow pod or oblong shapes. Smoother overlapping marks are easier on long thing shapes than with a round embossing hammer.
|
Face sizes |
7.2 mm x 22.4mm and 3.8 mm x 22.4 mm |
|
Head length |
102 mm |
|
Handle length |
250 mm |
$151.80
More info| SKU | HT-90108 |
| Unit Of Measure | ea |
Be The First To Review This Product!
Help other Combined Jewellery Services Pty Ltd users shop smarter by writing reviews for products you have purchased.
More From This Categories
Fretz Planishing Hammer
HMR-1
The Planishing Hammer is for smoothing metal. The round side is used if the metal has previous raising hammer marks and these need to be smoothed out. The flat side will refine the hammer marks from the rounded side of the Planishing Hammer to a nearly smooth finish. This is the m
Fretz Wide Raising Hammer
HMR-2
The Wide Raising Hammer can be used to raise sheet metal into a bowl against a wooden stake or a metal T-stake. It is also useful for raising in cylinders to form a concave shape. This same hammer also makes it possible to planish subtle concave shapes.
Fretz Narrow Raising Hammer
HMR-3
The Narrow Raising Hammer is for raising small cylinders and concave shapes. The thinner heads allow the hammer to fit into tighter curves for raising and planishing. It is also useful forging.
Fretz Lge Embossing Hammer
HMR-4
The Large Embossing Hammer is used to dome metal from the inside. The metal is stretched from the inside as it is supported on a sandbag or a depression carved in wood. Doming a piece of metal before raising makes it easier to control because the shape becomes rigid. The Embossing
