Fretz Small Embossing Hammer
Sold Out
The Small Embossing Hammer is used to form small raised areas by hammering from the inside in preparation for chasing or general shaping. This hammer leves a very fine dimpled texture that can be greatly varied by the strength of the blow.
| Face sizes | 10 mm and 7mm |
|---|---|
| Head length | 105 mm |
| Handle length | 250 mm |
| Type | Large |
$122.93
More info| SKU | HT-90105 |
| Shipping Weight | 0.2120kg |
| Shipping Width | 0.010m |
| Shipping Height | 0.003m |
| Shipping Length | 0.024m |
| Shipping Cubic | 0.000001000m3 |
| Unit Of Measure | ea |
Be The First To Review This Product!
Help other Combined Jewellery Services Pty Ltd users shop smarter by writing reviews for products you have purchased.
More From This Categories
Fretz Planishing Hammer
HMR-1
The Planishing Hammer is for smoothing metal. The round side is used if the metal has previous raising hammer marks and these need to be smoothed out. The flat side will refine the hammer marks from the rounded side of the Planishing Hammer to a nearly smooth finish. This is the m
Fretz Wide Raising Hammer
HMR-2
The Wide Raising Hammer can be used to raise sheet metal into a bowl against a wooden stake or a metal T-stake. It is also useful for raising in cylinders to form a concave shape. This same hammer also makes it possible to planish subtle concave shapes.
Fretz Narrow Raising Hammer
HMR-3
The Narrow Raising Hammer is for raising small cylinders and concave shapes. The thinner heads allow the hammer to fit into tighter curves for raising and planishing. It is also useful forging.
Fretz Lge Embossing Hammer
HMR-4
The Large Embossing Hammer is used to dome metal from the inside. The metal is stretched from the inside as it is supported on a sandbag or a depression carved in wood. Doming a piece of metal before raising makes it easier to control because the shape becomes rigid. The Embossing
